Characterization of photomultiplier tubes in a novel operation mode for Secondary Emission Ionization Calorimetry
Yazarlar (9)
E. Tiras
University of Iowa, Amerika Birleşik Devletleri
University of Iowa, Amerika Birleşik Devletleri
K. Dilsiz
University of Iowa, Amerika Birleşik Devletleri
University of Iowa, Amerika Birleşik Devletleri
Prof. Dr. Hasan OĞUL University of Iowa, Amerika Birleşik Devletleri
D. Southwick
University of Iowa, Amerika Birleşik Devletleri
University of Iowa, Amerika Birleşik Devletleri
B. Bilki
University of Iowa, Amerika Birleşik Devletleri
University of Iowa, Amerika Birleşik Devletleri
J. Wetzel
University of Iowa, Amerika Birleşik Devletleri
University of Iowa, Amerika Birleşik Devletleri
J. Nachtman University of Iowa, Amerika Birleşik Devletleri
Y. Onel
University of Iowa, Amerika Birleşik Devletleri
University of Iowa, Amerika Birleşik Devletleri
D. Winn Fairfield University, Amerika Birleşik Devletleri
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Journal of Instrumentation (Q2) | ||
| Dergi ISSN | 1748-0221 Dergi Bilgileri (2016) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 10-2016 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 06-10-2016 |
| Cilt / Sayı / Sayfa | 11 / 10 / 10004–10004 | DOI | 10.1088/1748-0221/11/10/P10004 |
| Makale Linki | http://stacks.iop.org/1748-0221/11/i=10/a=P10004?key=crossref.89cf3ff615a91062e0c01b9ca9a4b7b1 | ||
| UAK Araştırma Alanları |
Nükleer Fizik
|
||
| Özet |
| Hamamatsu single anode R7761 and multi-anode R5900-00-M16 Photomultiplier Tubes have been characterized for use in a Secondary Emission (SE) Ionization Calorimetry study. SE Ionization Calorimetry is a novel technique to measure electromagnetic shower particles in extreme radiation environments. The different operation modes used in these tests were developed by modifying the conventional PMT bias circuit. These modifications were simple changes to the arrangement of the voltage dividers of the baseboard circuits. The PMTs with modified bases, referred to as operating in SE mode, are used as an SE detector module in an SE calorimeter prototype, and placed between absorber materials (Fe, Cu, Pb, W, etc.). Here, the technical design of different operation modes, as well as the characterization measurements of both SE modes and the conventional PMT mode are reported. |
| Anahtar Kelimeler |
| Calorimeters | Detector modelling and simulations II (electric fields, charge transport, multiplication and induction, pulse formation, electron emission, etc) | Modular electronics | Photon detectors for UV | visible and IR photons (vacuum) (photomultipliers, HPDs, others) |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 4 |
| Scopus | 10 |
| Google Scholar | 16 |