| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Progress in Nuclear Energy (Q1) | ||
| Dergi ISSN | 0149-1970 Dergi Bilgileri (2021) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 09-2021 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-09-2021 |
| Cilt / Sayı / Sayfa | 139 / 1 / 103865–11 | DOI | 10.1016/j.pnucene.2021.103865 |
| Makale Linki | http://dx.doi.org/10.1016/j.pnucene.2021.103865 | ||
| UAK Araştırma Alanları |
Nükleer Fizik
|
||
| Özet |
| In this study, CdS doped polyester composites were produced at different weight ratios, and the impact of dopant amount on gamma and neutron shielding characteristics of a new composite material were further evaluated: the composite matrix was doped at 5%, 10%, 15% and 20% CdS weight ratios of the prepared composite. Then, the produced polyester materials have been characterized using a scanning electron microscope (SEM) and X-ray diffraction (XRD) patterns. Following the structure characterization, the prepared composites were tested using one gamma spectrometer system based HPGe detector with help of 22Na, 54Mn, 57Co, 60Co, 133Ba, 137Cs, 152Eu and 241Am radioactive point-isotropic sources in order to perform the evaluation in a wide energy range of gamma. The obtained results were compared to the results of Geant4 and WinXCOM simulation codes. On the last step of the presented … |
| Anahtar Kelimeler |
| Cadmium sulfide | Gamma attenuation | Neutron shielding | Removal cross section |
| Atıf Sayıları | |
| Web of Science | 36 |
| Scopus | 36 |
| Google Scholar | 44 |
| Dergi Adı | Progress in Nuclear Energy |
| Kısa Adı | PROG NUCL ENERG |
| Yayıncı | PERGAMON-ELSEVIER SCIENCE LTD |
| Açık Erişim | Hayır |
| ISSN | 0149-1970 |
| E-ISSN | 1878-4224 |
| Wos Quartile | Q1 |
| Scopus Quartile | Q2 |
| Tarandığı Indeksler | SCIE , Scopus |
| WoS Kategoriler | NUCLEAR SCIENCE & TECHNOLOGY |
| Scopus Kategoriler | ENERGY ENGINEERING AND POWER TECHNOLOGY | NUCLEAR ENERGY AND ENGINEERING | SAFETY, RISK, RELIABILITY AND QUALITY | WASTE MANAGEMENT AND DISPOSAL |