| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Nuclear Technology (Q2) | ||
| Dergi ISSN | 0029-5450 Dergi Bilgileri (2026) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Ingilizce | Basım Tarihi | 09-2026 |
| Cilt / Sayı / Sayfa | 212 / 9 / 2456–2471 | DOI | 10.1080/00295450.2025.2521960 |
| Makale Linki | https://doi.org/10.1080/00295450.2025.2521960 | ||
| UAK Araştırma Alanları |
Radyasyon Teknolojisi
Nükleer Malzemeler
Nükleer Teknoloji
|
||
| Özet |
| In this study, acrylonitrile butadiene styrene (ABS) polymer composites reinforced with different weight fractions of MoS₂ and CaWO₄ were fabricated and investigated for their gamma and neutron shielding capabilities through both experimental and simulation-based approaches. Gamma-ray attenuation measurements were conducted using a NaI(Tl) detector system, while GEANT4 and FLUKA Monte Carlo codes were employed to simulate both gamma and neutron shielding performance. Additionally, theoretical values of mass attenuation coefficients (MACs) were calculated using EpiXS software.Scanning electron microscopy analysis revealed a homogeneous dispersion of CaWO₄ and MoS₂ particles within the ABS matrix, although some agglomeration was observed at higher loadings. The results demonstrated that MS-3 and CW-3 exhibited superior gamma radiation shielding performance, with a MAC … |
| Anahtar Kelimeler |
| acrylonitrile butadiene styrene (ABS) | calcium tungstate | gamma-ray shielding | Molybdenum disulfide | neutron shielding |
| Atıf Sayıları | |
| Web of Science | 1 |
| Google Scholar | 1 |
| Dergi Adı | NUCLEAR TECHNOLOGY |
| Kısa Adı | NUCL TECHNOL |
| Yayıncı | TAYLOR & FRANCIS INC |
| Açık Erişim | Hayır |
| ISSN | 0029-5450 |
| E-ISSN | 1943-7471 |
| Wos Quartile | Q2 |
| Scopus Quartile | Q2 |
| Tarandığı Indeksler | SCIE , Scopus |
| WoS Kategoriler | NUCLEAR SCIENCE & TECHNOLOGY |
| Scopus Kategoriler | CONDENSED MATTER PHYSICS | NUCLEAR AND HIGH ENERGY PHYSICS | NUCLEAR ENERGY AND ENGINEERING |