| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | JOURNAL OF THERMAL SPRAY TECHNOLOGY (Q1) | ||
| Dergi ISSN | 1059-9630 Dergi Bilgileri (2018) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 12-2018 |
| Cilt / Sayı / Sayfa | 27 / 8 / 1414–1427 | DOI | 10.1007/s11666-018-0772-5 |
| Makale Linki | http://link.springer.com/10.1007/s11666-018-0772-5 | ||
| UAK Araştırma Alanları |
Malzeme ve Metalurji Mühendisliği
|
||
| Özet |
| This study focuses on the surface modification of a medical grade Co-Cr alloy via combining cold spray and thermal oxidation processes. After deposition of a Ti96-Al4 (wt.%) coating, samples were oxidized at 600 °C for 60 h in air. Oxidation transformed the coating into a dual-layered structure comprising an outer oxide layer (mainly rutile) with a diffusion layer (mainly oxygen enriched titanium and Ti-Al intermetallics) beneath it. Formation of new phases made the diffusion layer brittle and prone to fracture during pull out tests. Scratch and Rockwell-C tests confirmed good adhesion between the oxide and underlying diffusion layers, having average hardness as 1297 HV and 387 HV, respectively. The dual-layer coating exhibited excellent wear performance in a 0.9 wt.% NaCl solution against sliding action of alumina ball as compared to Co-Cr substrate, especially at contact pressures < 1200 MPa, while the … |
| Anahtar Kelimeler |
| coating | Co-Cr alloy | cold spray | thermal oxidation | titanium | wear |
| Atıf Sayıları | |
| Web of Science | 8 |
| Google Scholar | 9 |
| Dergi Adı | JOURNAL OF THERMAL SPRAY TECHNOLOGY |
| Kısa Adı | J THERM SPRAY TECHN |
| Yayıncı | SPRINGER |
| Açık Erişim | Hayır |
| ISSN | 1059-9630 |
| E-ISSN | 1544-1016 |
| Wos Quartile | Q1 |
| Scopus Quartile | Q1 |
| Tarandığı Indeksler | SCIE , Scopus |
| WoS Kategoriler | MATERIALS SCIENCE, COATINGS & FILMS |
| Scopus Kategoriler | MATERIALS CHEMISTRY | SURFACES, COATINGS AND FILMS | CONDENSED MATTER PHYSICS |