A Novel Fabrication Method for a TiO2 Layer Over CoCr Alloy
Yazarlar (7)
Doğukan Çetiner
İstanbul Teknik Üniversitesi, Türkiye
İstanbul Teknik Üniversitesi, Türkiye
Ahmet Hilmi Paksoy
Onur Tazegul
Prof. Dr. Murat Baydoğan İstanbul Teknik Üniversitesi, Türkiye
Dr. Öğr. Üyesi Hasan GÜLERYÜZ Sinop Üniversitesi, Türkiye
Hüseyin Çimenoğlu İstanbul Teknik Üniversitesi, Türkiye
Prof. Dr. Erdem Atar Gebze Teknik Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | SURFACE ENGINEERING (Q2) | ||
| Dergi ISSN | 0267-0844 Dergi Bilgileri (2019) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 03-2019 |
| Cilt / Sayı / Sayfa | 35 / 3 / 234–241 | DOI | 10.1080/02670844.2018.1459067 |
| Makale Linki | https://journals.sagepub.com/doi/full/10.1080/02670844.2018.1459067 | ||
| UAK Araştırma Alanları |
Malzeme ve Metalurji Mühendisliği
|
||
| Özet |
| This study has been initiated to form a TiO2 layer having enhanced biological properties on the surface of a CoCr alloy, which is mostly used in manufacturing of orthopaedic implants. As a novel approach, CoCr alloy samples were first coated with titanium and then oxidised in air at 600°C for 60 h. Surface characterisation of the samples were made by structural surveys (scanning electron microscopic examinations, X-ray diffraction analyses), roughness and hardness measurements, bioactivity and wear tests. Results of the experiments have showed that fabrication of TiO2 as the outermost surface layer caused remarkable increment in the wear resistance and the bioactivity of the CoCr alloy. |
| Anahtar Kelimeler |
| Biomaterial | thermal oxidation | cold spray | titanium dioxide | characterisation |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 6 |
| Google Scholar | 14 |