A Comparative Study On Microstructure Properties Of AZ91 Magnesium Alloy With Silicon Addition Using Ceramic Mold
Yazarlar (3)
Dr. Öğr. Üyesi Halil Ahmet GÖREN Sinop Üniversitesi, Türkiye
M. Ünal
Karabük Üniversitesi, Türkiye
Karabük Üniversitesi, Türkiye
E. Koç Karabük Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Acta Physica Polonica A (Q4) | ||
| Dergi ISSN | 0587-4246 Dergi Bilgileri (2019) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 05-2019 |
| Cilt / Sayı / Sayfa | 135 / 5 / 884–887 | DOI | 10.12693/APhysPolA.135.884 |
| Makale Linki | http://przyrbwn.icm.edu.pl/APP/PDF/135/app135z5p08.pdf | ||
| UAK Araştırma Alanları |
Alaşım Geliştirme
|
||
| Özet |
| Magnesium (Mg) alloys are used as the lightest metal engineering material. They are used in many areas such as microelectronics, aerospace, automobile industry for their low density. Mg alloys unite features such as strength, durability, good machinability and good castability under controlled atmosphere [1, 2]. Besides, Mg is 78% lighter than iron and steel, 36% lighter than aluminum in weight [3]. Among Mg alloys, AZ91 (Mg-9Al-1Zn) Mg alloy is remarkable with its good combination provided in terms of its castability, good mechanical characteristics [4]. Solubility of silicon (Si) in Mg is low. With the addition of Si to Mg, Mg2Si intermetallic occurs. While grain structure of the alloy became thinner with the increase in cooling rate of AZ91 Mg alloy, amount of (β) phase decreased and network shape became corrupted [5]. In this study, AZ91 and AZ91 1.95 wt% Si added Mg alloys were produced at different cooling rates. The aim of this study is to compare hardness characteristics and microstructure between these two alloys. |
| Anahtar Kelimeler |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 4 |
| Scopus | 4 |
| Google Scholar | 6 |