| Makale Türü |
|
||
| Dergi Adı | Nuclear Engineering and Technology (Q1) | ||
| Dergi ISSN | 1738-5733 Dergi Bilgileri (2024) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 06-2024 |
| Cilt / Sayı / Sayfa | 56 / 6 / 1943–1949 | DOI | 10.1016/j.net.2024.01.001 |
| Makale Linki | http://dx.doi.org/10.1016/j.net.2024.01.001 | ||
| UAK Araştırma Alanları |
Nükleer Fizik
|
||
| Özet |
| This study focuses on the comparative analysis of ABS polymer samples produced using two distinct manufacturing techniques: 3D printing and the sol-gel methods. In the first approach, ABS polymer was augmented with rare earth oxides, Er2O3 and Gd2O3, in nano powder form and fabricated into test specimens using 3D printing technology. In the second approach, identical samples were prepared via the sol-gel technique involving mold-based fabrication. Elemental content analysis revealed no significant differences between the samples produced by the two methods. The study proceeds to evaluate the gamma-ray shielding, neutron shielding, temperature resistance, and SEM/EDS pictures of ABS samples generated through both techniques. 3D printing method exhibited more favorable results in terms of structure morphology and thermal stability while there is no significant difference for radiation shielding … |
| Anahtar Kelimeler |
| 3D printer | ABS polymer | Radiation shielding | Rare earth oxides | Sol-gel |
| Atıf Sayıları | |
| Web of Science | 16 |
| Scopus | 18 |
| Google Scholar | 21 |
| Dergi Adı | Nuclear Engineering and Technology |
| Kısa Adı | NUCL ENG TECHNOL |
| Yayıncı | KOREAN NUCLEAR SOC |
| Açık Erişim | Evet |
| ISSN | 1738-5733 |
| E-ISSN | 1738-5733 |
| Wos Quartile | Q1 |
| Scopus Quartile | Q2 |
| Tarandığı Indeksler | SCIE , Scopus |
| WoS Kategoriler | NUCLEAR SCIENCE & TECHNOLOGY |
| Scopus Kategoriler | NUCLEAR ENERGY AND ENGINEERING |