Bone stress and damage distributions during dental implant insertion: A novel dynamic FEM analysis
Yazarlar (4)
Ahmet Emin Demirbas
Recep Ekici
Prof. Dr. Mustafa KARAKAYA Sinop Üniversitesi, Türkiye
Alper Alkan
Sinop Üniversitesi
Sinop Üniversitesi
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Computer methods in biomechanics and biomedical engineering (Q4) | ||
| Dergi ISSN | 1025-5842 Dergi Bilgileri (2022) | ||
| Makale Dili | – | Basım Tarihi | 08-2022 |
| Kabul Tarihi | 28-11-2021 | Yayınlanma Tarihi | 13-12-2021 |
| Cilt / Sayı / Sayfa | 25 / 12 / 1381–1392 | DOI | 10.1080/10255842.2021.2012765 |
| Makale Linki | https://www.tandfonline.com/doi/abs/10.1080/10255842.2021.2012765 | ||
| UAK Araştırma Alanları |
|
||
| Özet |
| The objective of this research was to evaluate the stress and damage occurring on the bone model of D2 quality during implant insertion procedure using a novel dynamic finite element analysis (FEA) modeling. Three-dimensional finite element method was used to simulate the implant placement into the mandible. The cross-sectional model of the implant was created in SolidWorks 2007 software. The implant model was created to resemble a commercially available fine thread bone level dental implant (Bilimplant®, Turkey). 3 D bone models created with and without cortical bone drilling were specified according to D2 bone (Misch's Bone Classification) with a 1.5 mm cortical bone thickness. The stress patterns in both cancellous and cortical crestal bone were examined during implant insertion by using a novel dynamic FEA in ABACUS/Explicit (ABAQUS/Explicit version 6.14). According to the results of the … |
| Anahtar Kelimeler |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Google Scholar | 33 |