Effects of microcrystalline cellulose on some performance properties of chitosan aerogels
Yazarlar (4)
Ertan Ozen Muğla Sıtkı Koçman Üniversitesi, Türkiye
Prof. Dr. Nadir Yildirim Bursa Teknik Üniversitesi, Türkiye
Dr. Öğr. Üyesi Berk DALKILIÇ Sinop Üniversitesi, Türkiye
Mehmet E. Ergun
Alanya Alaaddin Keykubat University, Türkiye
Alanya Alaaddin Keykubat University, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Maderas Ciencia Y Tecnologia (Q2) | ||
| Dergi ISSN | 0717-3644 Dergi Bilgileri (2021) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 01-2021 |
| Cilt / Sayı / Sayfa | 23 / 1 / 1–10 | DOI | 10.4067/S0718-221X2021000100426 |
| Makale Linki | http://revistas.ubiobio.cl/index.php/MCT/article/view/4590 | ||
| UAK Araştırma Alanları |
Ağaç İşleri Endüstri Mühendisliği
|
||
| Özet |
| The aim of this research was to investigate the effect of the microcrystalline cellulose reinforcement on some physical, mechanical, thermal, and morphological properties of the chitosan aerogels. The bio-based chitosan aerogels were produced using chitosan as a matrix and the microcrystalline cellulose as a reinforce material through the freeze-drying method. The aerogel suspensions were prepared in five different ratios to investigate the effect of microcrystalline cellulose content. The density, porosity, thermogravimetric analysis, and compressive resistance tests were conducted according to relevant standards. Morphological properties were investigated using a scanning electron microscope. The introduction of microcrystalline cellulose significantly improved the compressive resistance, thermal properties (Tonset and T%50) of the chitosan aerogels. The optimum performance properties determined as 0,12 MPa for compressive resistance, 0,27 MPa for compressive modulus, 292,45 °C for Tonset and 365 °C for T%50. According to scanning electron microscope images, aerogels showed microporous structure as expected. As a result, the bio-based chitosan aerogels reinforced with microcrystalline cellulose were successfully manufactured. The mechanical and thermal properties including compressive resistance, compressive modulus, Tonset and T%50 of chitosan- microcrystalline cellulose aerogels found promising. |
| Anahtar Kelimeler |
| Aerogels | bio-based | chitosan | compressive resistance | microcrystalline cellulose | scanning electron microscope | thermogravimetric analysis |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 24 |
| Scopus | 26 |
| Google Scholar | 33 |