Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: A review and future prospect
Yazarlar (9)
Danil Yu Pimenov
South Ural State University, Rusya Federasyonu
South Ural State University, Rusya Federasyonu
Mozammel Mia
Imperial College London, İngiltere
Imperial College London, İngiltere
Munish K. Gupta
South Ural State University, Rusya Federasyonu
South Ural State University, Rusya Federasyonu
Alisson R. Machado
Universidade Federal De Uberlândia, Brezilya
Universidade Federal De Uberlândia, Brezilya
Ítalo V. Tomaz Instituto Federal De Educação, Ciência E Tecnologia Fluminense – Iffluminense, Brezilya
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Szymon Wojciechowski
Politechnika Poznanska, Polonya
Politechnika Poznanska, Polonya
Tadeusz Mikolajczyk
Bydgoszcz University Of Science And Technology, Polonya
Bydgoszcz University Of Science And Technology, Polonya
Wojciech Kaplonek
Politechnika Koszalinska, Polonya
Politechnika Koszalinska, Polonya
| Makale Türü |
Diğer (Teknik, not, yorum, vaka takdimi, editöre mektup, özet, kitap krıtiği,
araştırma notu, bilirkişi raporu ve benzeri)
(SCI, SSCI, AHCI, SCI-Exp dergilerinde yayınlanan teknik not,
editöre mektup, tartışma, vaka takdimi ve özet türünden makale)
|
||
| Dergi Adı | Journal of Materials Research and Technology (Q1) | ||
| Dergi ISSN | 2238-7854 Dergi Bilgileri (2021) | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2021 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-03-2021 |
| Cilt / Sayı / Sayfa | 11 / 1 / 719–753 | DOI | 10.1016/j.jmrt.2021.01.031 |
| Makale Linki | https://doi.org/10.1016/j.jmrt.2021.01.031 | ||
| UAK Araştırma Alanları |
|
||
| Özet |
| Products made of titanium and its alloys are widely used in modern areas like the mechanical engineering, instrument making, aerospace and medical sector. High strength and low thermal conductivity are the causes of difficulties with the machinability of these alloys. It is important to find ways to increase machinability by cutting titanium alloys. One way to implement this is to apply various methods of cooling on workpieces of titanium alloys and on cutting tools during machining. In this review article, an extensive analysis of the literature on such cooling techniques as dry, conventional cooling system, minimum quantity of lubricant (MQL), minimum quantity cooling lubrication (MQCL), cryogenic lubrication, and high-pressure cooling (HPC) is performed. The following groups of Ti alloys are considered: high-strength structural and high-temperature Ti alloys, intermetallic compounds, pure titanium, as well as composites CFRPs/Ti alloys. For the processes of turning, milling, drilling, and grinding, etc. it is shown how the type of cooling affects the surface integrity include surface roughness, tool wear, tool life, temperature, cutting forces, environmental aspects, etc. The main advantages, disadvantages and prospects of different cooling methods are also shown. The problems and future trends of these methods for the machining of Ti and its alloys are indicated. |
| Anahtar Kelimeler |
| Conventional cooling system | Cryogenic cooling | Dry machining | High-pressure cooling | Machining | Minimum quantity of lubricant | Titanium alloys |
Science Direct
Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: A review and future prospect
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 219 |
| Scopus | 241 |