Formation of sulphur oxyanions and their influence on antimony electrowinning from sulphide electrolytes
Yazarlar (3)
Samuel A Awe
Åke Sandström
Makale Türü Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı Minerals Engineering (Q1)
Makale Dili – Basım Tarihi 11-2013
Cilt / Sayı / Sayfa 53 / 0 / 39–47 DOI –
Makale Linki https://www.sciencedirect.com/science/article/pii/S0892687513002197
UAK Araştırma Alanları
Dedektör Teknolojisi
Özet
Antimony electrowinning from synthetic alkaline sulphide electrolytes has been studied in a nondiaphragm electrolytic cell. The electrodes were constructed in such a way that the anode produces ten times higher current density than the cathodic current density to promote sulphide oxidation to sulphate at the anode; and simultaneously decreasing the tendency of hydrogen evolution at the cathode. The result revealed that at an anodic current density lower than 1500 A/m2, minute amounts of sulphate ions were formed but when the anode current density increased beyond 1500 A/m2, sulphate formation was promoted. The initial molar concentration ratio between hydroxide and free sulphide ions should be ⩾10.3 to avoid thiosulphate formation at 2000 A/m2 anodic current density under the conditions used in these experiments. The highest anodic current efficiency obtained based on the amount of sulphate …
Anahtar Kelimeler
BM Sürdürülebilir Kalkınma Amaçları
Atıf Sayıları
Google Scholar 39

Paylaş