Enhanced treatment of high-COD MDF wastewater using hybrid coagulation-membrane distillation process: Coagulation efficiency and membrane performance
Yazarlar (7)
Ismail Hakkı Zengin
Arş. Gör. Oruç Kaan TÜRK Sinop Üniversitesi, Türkiye
Merve Saral
Gizem Çelik
Gülin Biçe Yıldırım
Uğur Kurt
Mehmet Çakmakcı
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | CHEMICAL PAPERS (Q3) | ||
| Dergi ISSN | 0366-6352 Dergi Bilgileri (2026) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | Türkçe | Basım Tarihi | 07-2026 |
| Kabul Tarihi | 24-03-2026 | Yayınlanma Tarihi | 11-04-2026 |
| Cilt / Sayı / Sayfa | 80 / 7 / 7707–7724 | DOI | 10.1007/s11696-026-04847-w |
| UAK Araştırma Alanları |
Arıtma Tesisi Tasarımı
Çevre Kimyası
Su Kaynakları Yönetimi
|
||
| Özet |
| The treatment of medium density fiberboard (MDF) wastewater presents a significant challenge due to its complex composition and elevated temperature, which limit the effectiveness of conventional treatment methods. This study investigates the applicability of a hybrid coagulation–membrane distillation (MD) process for the treatment of high-strength MDF wastewater. Poly-aluminum chloride hydroxide (PACS) was employed as a pretreatment to reduce fouling potential, followed by MD using a hydrophobic polytetrafluoroethylene (PTFE) membrane operated at different feed temperatures (50–80 °C). The optimal operating condition was obtained at a feed temperature of 50 °C, where the PTFE membrane exhibited a stable flux of 9.45 L/m2.h and achieved a COD removal efficiency of 95.02%, together with over 95% reduction of conductivity, turbidity, color, and total suspended solids. Increasing feed temperature … |
| Anahtar Kelimeler |
| "MDF wastewater" | "Membrane distillation" | "Membrane wetting" | "Coagulation pretreatment" | "PACS" | "PTFE membrane" |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 1 |
| Google Scholar | 1 |