The modeling of results of cutting force vibration and surface roughness in milling operations
Yazarlar (1)
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (Uluslararası alan indekslerindeki dergilerde yayınlanan tam makale) | ||
| Dergi Adı | Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi | ||
| Makale Dili | – | Basım Tarihi | 01-2014 |
| Cilt / Sayı / Sayfa | 30 / 4 / 220–226 | DOI | – |
| Makale Linki | https://avesis.gazi.edu.tr/yayin/280dad40-1c7d-4029-99ae-0d83e995f6b5/the-modeling-of-results-of-cutting-force-vibration-and-surface-roughness-in-milling-operations | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| In this study, parameters of cutting have researched the effect on cutting force, vibration acceleration and surface roughness via multiple regression analysis. The machining parameters have used 132, 220, 308 mm/min cutting speed, 0,05, 0,1, 0,15, 0,2 mm/tooth feed rate, 1, 1,5 mm cutting depth and 1, 2, 4 the number of cutting edge in experimental. With these parameters, chips have removed on AISI 1050 material experimental at 100x50x20 sized. Experimental results of the parameters that affect the rates of multiple regression analysis using Minitab 15.0 software ANOVA (Analysis of Variance) tables were formed. In addition to, intermediate values for the calculation of the values and expected results were obtained in three separate mathematical formulas developed. |
| Anahtar Kelimeler |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Google Scholar | 2 |