Ultra-fast High-Temperature Sintering (UHS) of SOFC/SOEC electrodes for rapid and efficient cell fabrication
Yazarlar (6)
Javier A. Mena
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Doç. Dr. Tuğrul YUMAK Sinop Üniversitesi, Türkiye
Katarzyna Sabolsky
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Mason Cavalier
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Ethan Nees
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Edward M. Sabolsky
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
Benjamin M. Statler College Of Engineering And Mineral Resources, Amerika Birleşik Devletleri
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Journal of the European Ceramic Society (Q1) | ||
| Dergi ISSN | 0955-2219 Dergi Bilgileri (2026) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 08-2026 |
| Cilt / Sayı / Sayfa | 46 / 10 / 118260–0 | DOI | 10.1016/j.jeurceramsoc.2026.118260 |
| Makale Linki | https://doi.org/10.1016/j.jeurceramsoc.2026.118260 | ||
| UAK Araştırma Alanları |
Fiziksel Kimya
Enerji
Elektrokimya
|
||
| Özet |
| Ultra-Fast High-Temperature Sintering (UHS) was employed to evaluate the sintering behavior of materials used as electrodes in solid oxide fuel cells (SOFCs) and electrolysis cells (SOECs). The study focused on NiO-YSZ 60-40 wt% composite for the fuel-electrode, Gd₀.₁Ce₀.₉O₂₋ₓ (GDC) for the barrier layer and (La₀.₆₀Sr₀.₄₀)₀.₉₅Co₀.₂₀Fe₀.₈₀O₃₋ₓ (LSCF) for the air-electrode. The effects of UHS on densification trends, flatness/curvature, chemical composition, and microstructure were systematically analyzed. Additionally, the electrochemical performance of the sintered materials was assessed through electrochemical impedance spectroscopy (EIS) for the cathodes processed. Notably, UHS enabled densification of both thick film air and fuel electrodes on an electrolyte-supported cell architecture in 60-120 s achieving ~1000 – 1300 °C using 27 - 30 A under an inert atmosphere. Electrochemical … |
| Anahtar Kelimeler |
| Electrochemical Impedance Spectroscopy | Solid Oxide Fuel Cells (SOFCs) | Solid-oxide electrolysis cells (SOECs) | Ultra-Fast High-Temperature Sintering (UHS) |
Science Direct
Ultra-fast High-Temperature Sintering (UHS) of SOFC/SOEC electrodes for rapid and efficient cell fabrication
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 1 |
| Scopus | 1 |
| Google Scholar | 2 |