Fabrication of Ni, Cr, W reinforced new high alloyed stainless steels for radiation shielding applications
Yazarlar (6)
Bünyamin Aygün Ağrı İbrahim Çeçen Üniversitesi, Türkiye
Doç. Dr. Erdem Şakar Atatürk Üniversitesi, Türkiye
Prof. Dr. Turgay KORKUT Sinop Üniversitesi, Türkiye
Mı Sayyed
Prof. Dr. Abdulhalik KARABULUT Atatürk Üniversitesi, Türkiye
Mhm Zaıd
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | RESULTS IN PHYSICS (Q1) | ||
| Dergi ISSN | 2211-3797 Dergi Bilgileri (2019) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 03-2019 |
| Cilt / Sayı / Sayfa | 12 / 0 / 1–6 | DOI | 10.1016/j.rinp.2018.11.038 |
| Makale Linki | https://linkinghub.elsevier.com/retrieve/pii/S2211379718322368 | ||
| UAK Araştırma Alanları |
Nükleer Fizik
|
||
| Özet |
| Stainless steel is commonly used in radiation applications for its high temperature resistance and fine mechanical properties. In this study, three types of high alloyed stainless-steel samples were produced. Before the production, GEANT4 Monte Carlo simulation toolkit was used to estimate the total fast neutron macroscopic cross sections and gamma mass attenuation coefficients. The hot-pressing process and the powder metallurgy method were applied. We tested samples’ chemical and mechanical strength. Samples were exposed to both gamma rays and fast neutrons. The obtained simulation and experimental results for both neutron and gamma radiation are compatible. According to the simulation and experimental results, neutron shielding capacity of the new stainless-steel alloys is higher than the most commonly used 316LN stainless steel in nuclear applications. Among the prepared samples, SSA1 steel … |
| Anahtar Kelimeler |
| Neutron | Gamma shielding | Stainless steel | GEANT4 |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 54 |
| Google Scholar | 67 |