Sol gel derived zinc oxide films: Effect of deposition parameters on structure, microstructure and photoluminescence properties
Yazarlar (4)
Doç. Dr. Seval AKSOY PEHLİVANOĞLU Sinop Üniversitesi, Türkiye
Prof. Dr. Yasemin Çağlar Anadolu Üniversitesi, Türkiye
Saliha Ilıcan
Anadolu Üniversitesi, Türkiye
Anadolu Üniversitesi, Türkiye
Prof. Dr. Müjdat Çağlar Anadolu Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | SUPERLATTICES AND MICROSTRUCTURES (Q3) | ||
| Dergi ISSN | 0749-6036 Dergi Bilgileri (2011) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 11-2011 |
| Cilt / Sayı / Sayfa | 50 / 5 / 470–479 | DOI | 10.1016/j.spmi.2011.08.008 |
| Makale Linki | http://dx.doi.org/10.1016/j.spmi.2011.08.008 | ||
| UAK Araştırma Alanları |
Yarı İletkenler
|
||
| Özet |
| ZnO films were prepared by sol–gel method and deposited onto glass substrates with spin coating system. XRD patterns and FESEM analysis were used to investigate the effect of deposition parameters such as spin speed and molar concentration on the crystallinity and surface morphology of the films. XRD patterns show that ZnO films are polycrystalline with type-wurtzite hexagonal structure. The film which is deposited at 4000rpm and with 0.5M sol has the best crystallinity. The FESEM micrographs showed that the surface morphology of the films was not significantly affected from the spin speed. FESEM micrographs showed that the crystallite sizes of 1000, 4000 and 5000rpm are almost same. But 2000 and 3000rpm have lower crystallite sizes than the others. Also, the amount of voids in the 1M was found higher. The effect of spin speed and molar concentration on the optical properties of ZnO films was … |
| Anahtar Kelimeler |
| ZnO | Sol-gel growth | Microstructure | Photoluminescence |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 23 |
| Google Scholar | 29 |