Assessment of the sustainability and producibility of adobe constructions reinforced with Ca-based binders: Environmental life cycle analysis (LCA) and 3D printability
Yazarlar (4)
Dr. Öğr. Üyesi Gökhan Genç Türkiye
Doç. Dr. Rüya KILIÇ DEMİRCAN Sinop Üniversitesi, Türkiye
Prof. Dr. Figen Beyhan Türkiye
Doç. Dr. Gökhan Kaplan Atatürk Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | SCIENCE OF THE TOTAL ENVIRONMENT (Q1) | ||
| Dergi ISSN | 0048-9697 Dergi Bilgileri (2024) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2024 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-01-2024 |
| Cilt / Sayı / Sayfa | 906 / 0 / – | DOI | 10.1016/j.scitotenv.2023.167695 |
| Makale Linki | http://dx.doi.org/10.1016/j.scitotenv.2023.167695 | ||
| UAK Araştırma Alanları |
Yapı Malzemeleri
|
||
| Özet |
| This study investigated the usability of adobe samples reinforced with calcium-based binders in a 3D-printed technique. These adobe samples' physical, mechanical, durability and microstructure characteristics were investigated and their 3D printability characteristics experimentally. In the case of adobe production by 3D-printing method, the compressive strength decreased by 9-33 % compared to mold casting. While the thermal conductivity coefficient of adobe samples varied between 0.833 and 1.421 W/mK, the thermal conductivity was reduced by 43 % thanks to the preference for gypsum. Within the scope of the LCA analysis, the slightest effect in terms of environmental damage was observed in mixtures containing gypsum compared to cement and slaked lime mixtures. As a result, it was determined that adobe's physical and mechanical characteristics could be improved by using gypsum, lime and cement, and these mixtures can be used in 3D-printing. It was determined that more sustainable adobe production is possible with gypsum and lime. |
| Anahtar Kelimeler |
| Additive manufacturing | Adobe | Earth -based material | Life cycle assessment | Afm mono sulfate hydrate | CC calcite |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 8 |