Delik Delme Uygulamalarında Delik Kalitesinin Taguchi Yöntemiyle Optimizasyonu
Yazarlar (3)
Dr. Öğr. Üyesi Güven Meral Gazi Üniversitesi, Türkiye
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Prof. Dr. Hakan Dilipak Gazi Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (Diğer hakemli ulusal dergilerde yayınlanan tam makale) | ||
| Dergi Adı | Mühendis ve Makina Dergisi | ||
| Dergi ISSN | 1300-3402 | ||
| Makale Dili | Türkçe | Basım Tarihi | 01-2011 |
| Cilt / Sayı / Sayfa | 52 / 619 / 42–49 | DOI | – |
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| In this study, at the drilling applications with TiAlN coated and uncoated drills, efiects of cutting parameters on the dimensional accuracy and geometric deviations (diameter deviation, cyclicity deviation, cylindricality deviation) have been investigated and conditions of optimum machining have been determinate. Experiments have been made according to Taguchi L9 orthogonal plane and signal/noise rate has been based at the in the evaluation of experimental results. With the help of Minitab 15 software and by using Taguchi technique optimum control parameters are defined. Consequently, correlation experiments are made and it has been defined that optimization has been applicated successfully. In the same levels of control factors, it has been seen that performance of drill is better. More over, we observe that increasing of values of cutting speed, drill diameter and feed rate generally deviations ratios also … |
| Anahtar Kelimeler |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Google Scholar | 9 |