Multi response Optimization of Cutting Parameters for Hole Quality in Drilling of AISI 1050 Steel
Yazarlar (4)
Dr. Öğr. Üyesi Güven Meral Gazi Üniversitesi, Türkiye
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Prof. Dr. Hakan Dilipak Gazi Üniversitesi, Türkiye
Prof. Dr. Ulvi Şeker Gazi Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Arabian Journal for Science and Engineering (Q3) | ||
| Dergi ISSN | 2193-567X Dergi Bilgileri (2015) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 12-2015 |
| Cilt / Sayı / Sayfa | 40 / 12 / 3709–3722 | DOI | 10.1007/s13369-015-1854-z |
| Makale Linki | http://link.springer.com/10.1007/s13369-015-1854-z | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| In this study, the surface roughness, dimensional accuracy, and circular and cylindrical deviations characterizing the hole quality were investigated experimentally. AISI 1050 steel in experiments was chosen as reference material due to its extensive applications in many areas. Uncoated and TiAlN coated by physical vapor deposition (PVD) method HSS twist drills with different diameters were used. Experiments were conducted on a CNC vertical machining center under dry condition with different cutting speeds and feed rates. The hole depth was 17 mm to ensure L < 3D condition. After each experiment, hole properties such as surface roughness, dimensional accuracy, circular deviation, and axial misalignment between inlet and outlet holes (cylindrical deviation), all of those that show the hole quality, were measured, and the results were evaluated. In addition to experimental analysis, a statistical analysis was … |
| Anahtar Kelimeler |
| ANOVA | Drilling | Hole quality | Metal working | Metallic material | Optimization |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 24 |
| Scopus | 26 |
| Google Scholar | 36 |