Parametric optimization and process capability analysis for machining of nickel-based superalloy
Yazarlar (10)
Munish Kumar Gupta
Chandigarh University, Hindistan
Chandigarh University, Hindistan
Mozammel Mia
Ahsanullah University Of Science And Technology, Bangladeş
Ahsanullah University Of Science And Technology, Bangladeş
Catalin I. Pruncu
Imperial College London, İngiltere
Imperial College London, İngiltere
Wojciech Kapłonek
Politechnika Koszalinska, Polonya
Politechnika Koszalinska, Polonya
Krzysztof Nadolny
Politechnika Koszalinska, Polonya
Politechnika Koszalinska, Polonya
Karali Patra
Indian Institute Of Technology Patna, Hindistan
Indian Institute Of Technology Patna, Hindistan
Tadeusz Mikolajczyk
Bydgoszcz University Of Science And Technology, Polonya
Bydgoszcz University Of Science And Technology, Polonya
Daniil Yu Pimenov
South Ural State University, Rusya Federasyonu
South Ural State University, Rusya Federasyonu
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Vishal S. Sharma
Dr. B.R. Ambedkar National Institute Of Technology, Hindistan
Dr. B.R. Ambedkar National Institute Of Technology, Hindistan
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | International Journal of Advanced Manufacturing Technology (Q2) | ||
| Dergi ISSN | 0268-3768 Dergi Bilgileri (2019) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 06-2019 |
| Cilt / Sayı / Sayfa | 102 / 9 / 3995–4009 | DOI | 10.1007/s00170-019-03453-3 |
| Makale Linki | http://link.springer.com/10.1007/s00170-019-03453-3 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| The manufacturing of parts from nickel-based superalloy, such as Inconel-800 alloy, represents a challenging task for industrial sites. Their performances can be enhanced by using a smart cutting fluid approach considered a sustainable alternative. Further, to innovate the cooling strategy, the researchers proposed an improved strategy based on the minimum quantity lubrication (MQL). It has an advantage over flood cooling because it allows better control of its parameters (i.e., compressed air, cutting fluid). In this study, the machinability of superalloy Inconel-800 has been investigated by performing different turning tests under MQL conditions, where no previous data are available. To reduce the numerous numbers of tests, a target objective was applied. This was used in combination with the response surface methodology (RSM) while assuming the cutting force input (Fc), potential of tool wear (VBmax), surface … |
| Anahtar Kelimeler |
| Inconel-800 | MQL | Optimization | PSO | Sustainable machining | TLBO |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 103 |
| Scopus | 123 |
| Google Scholar | 145 |