Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy
Yazarlar (6)
Munish Kumar Gupta
National Institute Of Technology Hamirpur, Hindistan
National Institute Of Technology Hamirpur, Hindistan
Mozammel Mia
Ahsanullah University Of Science And Technology, Bangladeş
Ahsanullah University Of Science And Technology, Bangladeş
Gurraj Singh
Lovely Professional University, Hindistan
Lovely Professional University, Hindistan
Danil Yu Pimenov
South Ural State University, Rusya Federasyonu
South Ural State University, Rusya Federasyonu
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Vishal S Sharma
Dr. B.R. Ambedkar National Institute Of Technology, Hindistan
Dr. B.R. Ambedkar National Institute Of Technology, Hindistan
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | International Journal of Advanced Manufacturing Technology (Q2) | ||
| Dergi ISSN | 0268-3768 Dergi Bilgileri (2019) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 03-2019 |
| Cilt / Sayı / Sayfa | 101 / 1 / 55–69 | DOI | 10.1007/s00170-018-2870-4 |
| Makale Linki | http://link.springer.com/10.1007/s00170-018-2870-4 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| In machining of soft alloys, the sticky nature of localized material instigated by tool-work interaction exacerbates the tribological attitude and ultimately demeans it machinability. Moreover, the endured severe plastic deformation and originated thermal state alter the metallurgical structure of machined surface and chips. Also, the used tool edges are worn/damaged. Implementation of cooling-lubrication (C/L) agents to reduce friction at faying surfaces can ameliorate overall machinability. That is why, this paper deliberately discussed the influence of pure C/L methods, i.e., such as dry cutting (DC) and nitrogen cooling (N2), as well as hybrid C/L strategies, i.e., nitrogen minimum quantity lubrication (N2MQL) and Ranque–Hilsch vortex tube (RHVT) N2MQL conditions in turning of Al 7075-T6 alloy, respectively. With respect to the variation of cutting speed and feed rate, at different C/Ls, the surface roughness, tool wear … |
| Anahtar Kelimeler |
| Hybrid cooling-lubrication | Machinability | Minimum quantity lubrication | Surface topography | Tool wear |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 119 |
| Scopus | 169 |
| Google Scholar | 201 |