Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4nbspV alloy
Yazarlar (9)
Munish Kumar Gupta
Shandong University, Çin
Shandong University, Çin
Qinghua Song
Shandong University, Çin
Shandong University, Çin
Zhanqiang Liu
Shandong University, Çin
Shandong University, Çin
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Muhammad Jamil
Nanjing University Of Aeronautics And Astronautics, Çin
Nanjing University Of Aeronautics And Astronautics, Çin
Mozammel Mia
Imperial College London, İngiltere
Imperial College London, İngiltere
Vinod Kushvaha
Indian Institute Of Technology Jammu, Hindistan
Indian Institute Of Technology Jammu, Hindistan
Anil Kumar Singla
Sant Longowal Institute Of Engineering And Technology, Hindistan
Sant Longowal Institute Of Engineering And Technology, Hindistan
Zhixiong Li
University Of Wollongong, Avustralya
University Of Wollongong, Avustralya
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Sustainable Materials and Technologies (Q1) | ||
| Dergi ISSN | 2214-9937 Dergi Bilgileri (2020) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 12-2020 |
| Cilt / Sayı / Sayfa | 26 / 1 / 218–0 | DOI | 10.1016/j.susmat.2020.e00218 |
| Makale Linki | https://linkinghub.elsevier.com/retrieve/pii/S2214993720306448 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| Ti-6Al-4 V alloy is a well-acknowledged standard material for the application of modern aerospace, surgical equipment, and prosthetic body parts owing to its stable thermo-physical properties at elevated temperature. However, this structure stability imparts its low thermal conductivity that leads to buildup of heat at tool-workpiece interface during machining which subsequently has a damaging effect on the tool cutting edge. Several biodegradable cutting fluids have already been attempted controlling the heat generation, environmental footprints to improve the overall machinability. In this endeavor, the effectiveness of dry, liquid nitrogen (LN2) and hybrid cryogenic and minimum quantity lubrication (LN2 + MQL) conditions was evaluated in terms of important machinability indicators for instance surface roughness, cutting forces and temperature. The environmental parameters such as total cycle time, productivity … |
| Anahtar Kelimeler |
| Carbon emissions | Economical | Energy consumption | Sustainability assessment | Titanium alloy |
Science Direct
Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4nbspV alloy
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 112 |
| Scopus | 129 |
| Google Scholar | 148 |