Performance evaluation of MQL with AL2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy
Yazarlar (4)
Fatih Günan
Düzce Üniversitesi, Türkiye
Düzce Üniversitesi, Türkiye
Prof. Dr. Turgay Kıvak Düzce Üniversitesi, Türkiye
Prof. Dr. Çağrı Vakkas Yıldırım Erciyes Üniversitesi, Türkiye
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Journal of Materials Research and Technology (Q1) | ||
| Dergi ISSN | 2238-7854 Dergi Bilgileri (2020) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 09-2020 |
| Cilt / Sayı / Sayfa | 9 / 5 / 10386–10400 | DOI | 10.1016/j.jmrt.2020.07.018 |
| Makale Linki | https://linkinghub.elsevier.com/retrieve/pii/S2238785420315167 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| Since some deficiencies in mist lubri-cooling techniques i.e., minimum quantity lubrication (MQL) in heavy cutting conditions have been noticed, recently nano-cutting fluids which have enrich thermal conductivity than base fluid, are begun to be used in MQL system. One of the critical issues arising in this process is the addition of the appropriate nanoparticle ratio to the base liquid. Therefore, this study aimed to find the optimum distribution rate of Al2O3 nanoparticles having excellent properties and machining parameters. For this purpose, by adding Al2O3 nanoparticles to vegetable-based cutting fluid, nano-cutting fluids were prepared in different volumetric concentrations (0.5, 1.0 and 1.5 vol%). These prepared nanofluids were used in the MQL system when milling of Hastelloy C276. Three cutting speeds (60, 75 and 90 m/min) and three different feed rates (0.10, 0.15 and 0.20 mm/rev) were added to the … |
| Anahtar Kelimeler |
| Al2O3 based nano-cutting fluid | Hastelloy C276 | Surface roughness | Tool wear | Wear mechanisms |
Science Direct
Performance evaluation of MQL with AL2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 87 |
| Scopus | 113 |
| Google Scholar | 141 |