Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy
Yazarlar (10)
Munish Kumar Gupta
Shandong University, Çin
Shandong University, Çin
Qinghua Song
Shandong University, Çin
Shandong University, Çin
Zhanqiang Liu
Shandong University, Çin
Shandong University, Çin
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Mozammel Mia
Imperial College London, İngiltere
Imperial College London, İngiltere
Muhammad Jamil
Nanjing University Of Aeronautics And Astronautics, Çin
Nanjing University Of Aeronautics And Astronautics, Çin
Anil Kumar Singla
Sant Longowal Institute Of Engineering And Technology, Hindistan
Sant Longowal Institute Of Engineering And Technology, Hindistan
Anuj Bansal
Sant Longowal Institute Of Engineering And Technology, Hindistan
Sant Longowal Institute Of Engineering And Technology, Hindistan
Danil Yu Pimenov
South Ural State University, Rusya Federasyonu
South Ural State University, Rusya Federasyonu
Doç. Dr. Mustafa Kuntoğlu Selçuk Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Tribology International (Q1) | ||
| Dergi ISSN | 0301-679X Dergi Bilgileri (2021) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 01-2021 |
| Cilt / Sayı / Sayfa | 160 / 1 / 107032–0 | DOI | 10.1016/j.triboint.2021.107032 |
| Makale Linki | http://dx.doi.org/10.1016/j.triboint.2021.107032 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| Machining of titanium is considered as a challenging process due to its ability to interact with various tool materials when critical cutting temperature is exceeded, resulting in excessive tool wear and poor surface finish, etc. To exhibit an efficient machining process, this research study has experimentally investigated the key quality indicators of machinability, namely surface roughness, cutting temperature, tool wear, in-depth analysis of worn tool and cutting force in the machining process of α-β titanium alloy, which used in critical applications, under three sustainable cooling environments i.e., dry, liquid nitrogen (LN2) and carbon dioxide (CO2). The effect of cutting speed and feed rate on such performance measures were examined under a function of cooling strategy as the best substitute in machining. As a result, the feasibility of LN2 cooling has been confirmed to be more significant for the machining of α-β … |
| Anahtar Kelimeler |
| Cryogenic machining | Surface roughness | Titanium | Tool wear | Tribological aspects |
Science Direct
Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 77 |
| Scopus | 88 |
| Google Scholar | 104 |