Tribological behavior of textured tools in sustainable turning of nickel based super alloy
Yazarlar (6)
Munish Kumar Gupta
Shandong University, Çin
Shandong University, Çin
Qinghua Song
Shandong University, Çin
Shandong University, Çin
Zhanqiang Liu
Shandong University, Çin
Shandong University, Çin
Rupinder Singh
Institute Of Nano Science And Technology, Mohali, Hindistan
Institute Of Nano Science And Technology, Mohali, Hindistan
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Navneet Khanna Institute Of Infrastructure, Technology, Research And Management, Hindistan
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Tribology International (Q1) | ||
| Dergi ISSN | 0301-679X Dergi Bilgileri (2021) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 03-2021 |
| Cilt / Sayı / Sayfa | 155 / 1 / 106775–0 | DOI | 10.1016/j.triboint.2020.106775 |
| Makale Linki | http://dx.doi.org/10.1016/j.triboint.2020.106775 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| In this research study, textured tools were fabricated and used for machining under different cooling conditions. The most important uniqueness of the work lies in the use of textured tools for machining Inconel-718 under dry, Nitrogen cooling and nanofluids (hBN mixed with minimum quantity lubrication) conditions. In the turning experiments, two different level of cutting speed i.e., 75 and 125 m/min and a constant level for feed rate (0.1 mm/rev) and depth of cut (0.5 mm) were considered. The above three conditions were tested and compared with and without the use of textured tools. The tool wear, surface roughness, cutting temperature, micro-hardness of machined samples and chip morphology were investigated under these subjected conditions and at turning parameters. The results demonstrated that the nanofluids with textured tool provide the superior results in comparison with other cooling conditions … |
| Anahtar Kelimeler |
| Cutting temperature | Machining | Surface roughness | Textured tools | Tool wear |
Science Direct
Tribological behavior of textured tools in sustainable turning of nickel based super alloy
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 86 |
| Scopus | 96 |
| Google Scholar | 108 |