Investigation into the surface quality and stress corrosion cracking resistance of AISI 316L stainless steel via precision end-milling operation
Yazarlar (5)
Muhammad Yasir
Nfc Iet Multan, Pakistan
Nfc Iet Multan, Pakistan
Mohd Danish
University Of Jeddah, Suudi Arabistan
University Of Jeddah, Suudi Arabistan
Mozammel Mia
Imperial College London, İngiltere
Imperial College London, İngiltere
Munish Kumar Gupta
Shandong University, Çin
Shandong University, Çin
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | International Journal of Advanced Manufacturing Technology (Q2) | ||
| Dergi ISSN | 0268-3768 Dergi Bilgileri (2020) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2020 |
| Cilt / Sayı / Sayfa | 112 / 3 / 1065–1076 | DOI | 10.1007/s00170-020-06413-4 |
| Makale Linki | http://dx.doi.org/10.1007/s00170-020-06413-4 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| This study presents a two-fold investigation on precision end-milling of stainless steel (AISI 316L). First, the impact of end-milling variables (cutting speed and feed rate) on the surface quality (surface roughness, microhardness, and surface morphology) was analyzed. The best surface quality with surface roughness (Ra) 0.65 ± 0.02 μm was observed for cutting speed of 140 m/min and 0.025 mm/tooth of feed rate. Microhardness was increased with increment in cutting speed. Second, the impact of surface roughness (Ra) on the stress corrosion cracking under two different mediums, i.e., body solutions (Hank’s solution) and 1 M hydrochloric acid solution, was studied. The investigations showed that the samples with higher surface roughness values were more prone to stress corrosion cracking. |
| Anahtar Kelimeler |
| Precision end-milling | Stress corrosion cracking | Surface integrity | Surface roughness |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 26 |
| Scopus | 30 |
| Google Scholar | 37 |