Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti–6Al–4V titanium alloy: Cryogenic versus wet machining
Yazarlar (6)
Chetan Agrawal
Institute Of Infrastructure, Technology, Research And Management, Hindistan
Institute Of Infrastructure, Technology, Research And Management, Hindistan
Jwalant Wadhwa
Institute Of Infrastructure, Technology, Research And Management, Hindistan
Institute Of Infrastructure, Technology, Research And Management, Hindistan
Anjali Pitroda
Institute Of Infrastructure, Technology, Research And Management, Hindistan
Institute Of Infrastructure, Technology, Research And Management, Hindistan
Catalin Iulian Pruncu
University Of Birmingham, İngiltere
University Of Birmingham, İngiltere
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Navneet Khanna Institute Of Infrastructure, Technology, Research And Management, Hindistan
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Tribology International (Q1) | ||
| Dergi ISSN | 0301-679X Dergi Bilgileri (2021) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2021 |
| Cilt / Sayı / Sayfa | 153 / 1 / 106597–0 | DOI | 10.1016/j.triboint.2020.106597 |
| Makale Linki | http://dx.doi.org/10.1016/j.triboint.2020.106597 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| Cryogenic machining has emerged as a sustainable technique that reflects in terms of reduced environmental effects, superior part quality, and lesser resource consumption. However, further exploration of machinability and sustainability improvements using this technique will help the manufacturing industry to adopt it as an alternative to conventional techniques. In this government-supported work, the machinability of Ti–6Al–4V is assessed at five different cutting speeds (70, 80, 90, 100, and 110 m/min) under wet and cryogenic environments. This article presents a detailed analysis of tool wear (flank and crater wear), power consumption, and surface roughness to seek improvements in machinability of Ti–6Al–4V using cryogenic turning in comparison to wet turning. To investigate the sustainability aspects of cryogenic and wet turning, results are also analyzed in terms of total machining cost and carbon … |
| Anahtar Kelimeler |
| Carbon emissions | Crater wear | Cryogenic turning | Machining cost assessment | Power consumption | Ti–6Al–4V |
Science Direct
Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti–6Al–4V titanium alloy: Cryogenic versus wet machining
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 187 |
| Scopus | 216 |
| Google Scholar | 254 |