Investigation of the characteristic properties of graphene-based nanofluid and its effect on the turning performance of Hastelloy C276 alloy
Yazarlar (5)
M. Naresh Babu
Easwari Engineering College, Hindistan
Easwari Engineering College, Hindistan
V. Anandan
Saveetha Engineering College, Hindistan
Saveetha Engineering College, Hindistan
Prof. Dr. Çağrı Vakkas Yıldırım Erciyes Üniversitesi, Türkiye
M. Dinesh Babu
Panimalar Engineering College, Hindistan
Panimalar Engineering College, Hindistan
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Wear (Q1) | ||
| Dergi ISSN | 0043-1648 Dergi Bilgileri (2022) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 12-2022 |
| Cilt / Sayı / Sayfa | 510 / 1 / 204495–0 | DOI | 10.1016/j.wear.2022.204495 |
| Makale Linki | http://dx.doi.org/10.1016/j.wear.2022.204495 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| The present paper addresses an ecological machining method in turning Hastelloy C 276 Nickel alloy under different conditions such as dry, oil with least quantity lubrication (LQL), and graphene-based nanofluid LQL (NFLQL) by changing the cutting speed (31, 46, and 62 m/min) and feed rate (0.1, 0.15 and 0.2 mm/rev). Four machining responses were studied namely: surface roughness, tool wear, cutting temperature, and chip thickness. The wettability, pH value, and stability of the nanofluids were assessed prior to the machining process. The output revealed that the usage of NFLQL enhanced the machining performance in contrast to the oil LQL and dry conditions. The average reduction in the surface roughness with NFLQL condition is about 66% compared to dry machining. In addition, NFLQL gives the lowest cutting temperature (40 °C), flank wear (0.053 mm), and chip thickness (0.16 mm) respectively. In a … |
| Anahtar Kelimeler |
| Chip morphology | Graphene-based nanofluid | Physical properties | SEM analysis | Tool wear |
Science Direct
Investigation of the characteristic properties of graphene-based nanofluid and its effect on the turning performance of Hastelloy C276 alloy
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 32 |
| Scopus | 39 |
| Google Scholar | 46 |