A study on the influence of thermally assisted novel hybrid methods on the drilling behavior of Ti6Al4V alloy
Yazarlar (5)
Şener Karabulut
Hacettepe Üniversitesi, Türkiye
Hacettepe Üniversitesi, Türkiye
Musa Bilgin
Hacettepe Üniversitesi, Türkiye
Hacettepe Üniversitesi, Türkiye
Öğr. Gör. Halil Karakoç Hacettepe Üniversitesi, Türkiye
Navneet Khanna
Opole University Of Technology, Polonya
Opole University Of Technology, Polonya
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Tribology International (Q1) | ||
| Dergi ISSN | 0301-679X Dergi Bilgileri (2022) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 11-2022 |
| Cilt / Sayı / Sayfa | 175 / 1 / 107852–0 | DOI | 10.1016/j.triboint.2022.107852 |
| Makale Linki | http://dx.doi.org/10.1016/j.triboint.2022.107852 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| The paper focuses on the drilling behavior of Ti6Al4V alloy under dry, MQL, hot (also expressed as heat-assisted machining), and hybrid (hot+MQL) environments. The surface roughness and morphologies, power consumption, drilling force, microhardness, and microstructural behavior using electron backscatter diffraction (EBSD) analysis were studied. As a result, the lowest roughness value was obtained in the MQL, followed by dry, hot and hybrid drilling environments. Based on SEM investigation on machined surfaces, the defects i.e., smearing, chip debris and side flow were found to be the main causes of poor surface quality, especially under hot and hybrid-assisted drilling environments. According to the Euler color distribution, the hot working affected the machined surface up to the bulk material with a length of 98 µm. The hot drilling process led to the recrystallization of the grain structure, and the … |
| Anahtar Kelimeler |
| EBSD analysis | Hybrid drilling | Microstructure analysis | Surface morphology | Ti6Al4V alloy |
Science Direct
A study on the influence of thermally assisted novel hybrid methods on the drilling behavior of Ti6Al4V alloy
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 15 |
| Scopus | 21 |
| Google Scholar | 21 |