Cutting forces and temperature measurements in cryogenic assisted turning of AA2024-T351 alloy: An experimentally validated simulation approach
Yazarlar (6)
Munish Kumar Gupta
Opole University Of Technology, Polonya
Opole University Of Technology, Polonya
Doç. Dr. Mehmet Erdi Korkmaz Karabük Üniversitesi, Türkiye
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Grzegorz Krolczyk
Opole University Of Technology, Polonya
Opole University Of Technology, Polonya
Mustafa Günay Karabük Üniversitesi, Türkiye
Szymon Wojciechowski
Politechnika Poznanska, Polonya
Politechnika Poznanska, Polonya
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Measurement Journal of the International Measurement Confederation (Q1) | ||
| Dergi ISSN | 0263-2241 Dergi Bilgileri (2022) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2022 |
| Cilt / Sayı / Sayfa | 188 / 1 / 110594–0 | DOI | 10.1016/j.measurement.2021.110594 |
| Makale Linki | http://dx.doi.org/10.1016/j.measurement.2021.110594 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| Aluminium alloys are widely used in modern engineering applications such as automobile, aerospace etc because of its characteristics. The machining of aluminium alloys are also considered as difficult because of its sticky and soft nature, low thermal conductivity, strain hardening effect etc. The cooling conditions employed at cutting zone improved the machining performance but the resources, material consumption, skilled labor etc. are also required for performing the machining experiments. Therefore, the simulation of process parameters with the help of Finite Element Modelling (FEM) during machining is highly researched topic these days. In this work, a new practice from measurement science i.e., FEM simulation was performed with AdvantEdge software and the prediction models were developed for evaluating the cutting forces and cutting temperature while machining AA2024-T351 alloy under dry, liquid … |
| Anahtar Kelimeler |
| Aluminum alloy | Cooling conditions | Cutting forces | Cutting temperature | Machining | Simulation |
Science Direct
Cutting forces and temperature measurements in cryogenic assisted turning of AA2024-T351 alloy: An experimentally validated simulation approach
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 79 |
| Scopus | 86 |
| Google Scholar | 113 |