Optimization of hole quality produced by novel drill geometries using the Taguchi S/N approach
Yazarlar (5)
Güven Meral Gazi Üniversitesi, Türkiye
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Mozammel Mia
Ahsanullah University Of Science And Technology, Bangladeş
Ahsanullah University Of Science And Technology, Bangladeş
Prof. Dr. Hakan Dilipak Gazi Üniversitesi, Türkiye
Ulvi Şeker Gazi Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | International Journal of Advanced Manufacturing Technology (Q2) | ||
| Dergi ISSN | 0268-3768 Dergi Bilgileri (2019) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 03-2019 |
| Cilt / Sayı / Sayfa | 101 / 1 / 339–355 | DOI | 10.1007/s00170-018-2956-z |
| Makale Linki | http://link.springer.com/10.1007/s00170-018-2956-z | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| Reportedly, the drill geometry influences the drilling operation. In fact, the performance of the drill bit is strongly associated with productivity, thus with economy of production. Moreover, the typical performance indicators, i.e., deviation from diameter, cylindricity, perpendicularity, and concentricity, are altered by drill geometry. This fact stresses the need for a novel design of drills with further optimization of performance indicators of hole quality. In that perspective, herein, new drill geometries were designed and fabricated. Afterward, those drills were employed to create holes on AISI 4140 steel, and their performances were investigated and optimized to suggest cutting parameters of best interest. For performance tests, four different drill geometries, four different cutting speeds (90, 100, 110, 120 m/min), and four different feeds (0.15, 0.20, 0.25, 0.30 mm/rev) were practiced. To measure the performance of the drills, the … |
| Anahtar Kelimeler |
| Concentricity | Cylindricity | Drill geometry | Drilling | Optimization | Perpendicularity | Taguchi S/N method |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 15 |
| Scopus | 16 |
| Google Scholar | 26 |