Comparison of Tool Wear, Surface Morphology, Specific Cutting Energy and Cutting Temperature in Machining of Titanium Alloys Under Hybrid and Green Cooling Strategies
Yazarlar (7)
Munish Kumar Gupta
Opole University Of Technology, Polonya
Opole University Of Technology, Polonya
P. Niesłony
Opole University Of Technology, Polonya
Opole University Of Technology, Polonya
Doç. Dr. Mehmet Erdi Korkmaz Karabük Üniversitesi, Türkiye
Doç. Dr. Mustafa Kuntoğlu Selçuk Üniversitesi, Türkiye
G. M. Królczyk Opole University Of Technology, Polonya
Mustafa Günay Karabük Üniversitesi, Türkiye
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | International Journal of Precision Engineering and Manufacturing Green Technology (Q1) | ||
| Dergi ISSN | 2288-6206 Dergi Bilgileri (2023) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 03-2023 |
| Cilt / Sayı / Sayfa | 10 / 6 / 1393–1406 | DOI | 10.1007/s40684-023-00512-9 |
| Makale Linki | http://dx.doi.org/10.1007/s40684-023-00512-9 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
|
||
| Özet |
| Cutting energy must be reduced in order to make machining processes more eco-friendly. More energy was expended for the same amount of material removed, hence a higher specific cutting energy (SCE) implies inefficient material removal. Usually, the type of coolants or lubricants affects the SCE, or the amount of energy needed to cut a given volume of material. Therefore, the present work deals with a study of SCE in the turning of Ti–3Al–2.5V alloy under green cooling strategies. In spite of this, the research effort is also focused on the mechanism of tool wear, surface roughness, and cutting temperature under hybrid cooling, i.e., minimum quantity lubrication (MQL) and cryogenic. The tool wear rate, were explored with tool mapping analysis, and the results were compared with dry, MQL, and liquid nitrogen (LN2) conditions. The tool wear rate analysis claims that the dry condition causes more built up edge … |
| Anahtar Kelimeler |
| Green cooling | Hybrid cooling | SCE | Sustainable manufacturing | Titanium alloys |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 85 |
| Scopus | 93 |
| Google Scholar | 115 |