Assessing the cooling/lubricating agencies for sustainable alternatives during machining of Nimonic 80: Economic and environmental impacts
Yazarlar (6)
Mayur A. Makhesana
Nirma University, Institute Of Technology, Hindistan
Nirma University, Institute Of Technology, Hindistan
Harsh Vesuwala
Institute Of Infrastructure, Technology, Research And Management, Hindistan
Institute Of Infrastructure, Technology, Research And Management, Hindistan
Kaushik M. Patel
Nirma University, Institute Of Technology, Hindistan
Nirma University, Institute Of Technology, Hindistan
Ana Vafadar
Edith Cowan University, Avustralya
Edith Cowan University, Avustralya
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
Navneet Khanna Institute Of Infrastructure, Technology, Research And Management, Hindistan
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Heliyon (Q1) | ||
| Dergi ISSN | 2405-8440 Dergi Bilgileri (2024) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 04-2024 |
| Cilt / Sayı / Sayfa | 10 / 8 / – | DOI | 10.1016/j.heliyon.2024.e29238 |
| Makale Linki | https://doi.org/10.1016/j.heliyon.2024.e29238 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
Triboloji
|
||
| Özet |
| Developing sustainable manufacturing methods that balance environmental and economic aspects is challenging. A comprehensive analysis of the economics of machining and carbon emissions is essential to encourage adopting sustainable practices. This work presents the machinability and comparative sustainability analysis of Nimonic 80 superalloy when it is machined utilizing a novel, environmentally friendly vegetable oil-based hybrid nanofluid-minimum quantity lubrication (MQL) and liquid carbon dioxide (LCO2) technique. The main objective is to comprehend the efficacy of the proposed approach on tool life, surface roughness, power consumption, total machining costs, and carbon emissions. Compared to other machining conditions, the use of hybrid nanofluid-MQL under 100 m/min cutting speed prevented rapid flank wear and considerably increased tool life by about 17–59 %. The change in cutting … |
| Anahtar Kelimeler |
| Carbon emissions | Hybrid nanofluid-MQL | LCO2 | Machining | Machining costs | Nimonic 80 | Sustainability analysis | Vegetable oil |
Science Direct
Assessing the cooling/lubricating agencies for sustainable alternatives during machining of Nimonic 80: Economic and environmental impacts
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 9 |
| Scopus | 9 |
| Google Scholar | 12 |