An experimental investigation on machining-induced surface/subsurface characteristics of nickel based Inc-718 alloy: A novel hybrid approach in milling process
Yazarlar (5)
Musa Bilgin
Hacettepe Üniversitesi, Türkiye
Hacettepe Üniversitesi, Türkiye
Şener Karabulut
Hacettepe Üniversitesi, Türkiye
Hacettepe Üniversitesi, Türkiye
Öğr. Gör. Halil Karakoç Hacettepe Üniversitesi, Türkiye
Prof. Dr. Yunus Kayır Gazi Üniversitesi, Türkiye
Prof. Dr. Murat SARIKAYA Sinop Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Tribology International (Q1) | ||
| Dergi ISSN | 0301-679X Dergi Bilgileri (2024) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 03-2024 |
| Cilt / Sayı / Sayfa | 191 / 1 / 109120–0 | DOI | 10.1016/j.triboint.2023.109120 |
| Makale Linki | https://doi.org/10.1016/j.triboint.2023.109120 | ||
| UAK Araştırma Alanları |
Üretim Teknolojileri
Triboloji
|
||
| Özet |
| Nickel-based superalloy Inc-718 has become an indispensable alloy in critical sectors, especially in the aerospace industry, thanks to its unique characteristics. However, some properties of the alloy (especially low thermal conductivity and hot hardness) cause difficulties in its machinability. For this reason, comprehensive studies to improve the machinability of Inc-718 alloy by considering the microstructural properties are guiding. In this context, the present study uses various methods to increase the machinability efficiency of Inc-718, while also investigating their effect on microstructural properties. Firstly, the effect of the pre-heating process (hot), pure-MQL (PMQL), nanofluid-MQL (NMQL), and hybrid methods (hot+PMQL and hot-NMQL) on the surface roughness, cutting forces, tool wear, vibration, and temperature was investigated while milling Inc-718 surfaces. Then the utilization of Electron Backscatter … |
| Anahtar Kelimeler |
| EBSD analysis | Heat assisted machining | Inconel-718 | Microstructural behaviors | Nanofluids | Tool wear |
Science Direct
An experimental investigation on machining-induced surface/subsurface characteristics of nickel based Inc-718 alloy: A novel hybrid approach in milling process
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 28 |
| Scopus | 27 |
| Google Scholar | 29 |