A Comparative Study about Production of Vanadium Carbide via Self Propagating High Temperature Synthesis and Reduction
Yazarlar (5)
Mehmet Buğdayci Yalova Üniversitesi, Türkiye
Doç. Dr. Levent ÖNCEL Sinop Üniversitesi, Türkiye
Dr. Öğr. Üyesi Murat Alkan Dokuz Eylül Üniversitesi, Türkiye
Doç. Dr. Ahmet Turan Yeditepe Üniversitesi, Türkiye
Arş. Gör. Umay Çinarli Yeditepe University, Türkiye
Makale Türü Açık Erişim Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı Archives of Metallurgy and Materials (Q4)
Dergi ISSN 1733-3490 Dergi Bilgileri (2024)
Dergi Tarandığı Indeksler SCI-Expanded
Makale Dili Ingilizce Basım Tarihi 04-2024
Cilt / Sayı / Sayfa 69 / 1 / 257–262 DOI 10.24425/amm.2024.147816
Makale Linki https://www.imim.pl/archives/volume-69-issue-12024
UAK Araştırma Alanları
Akıllı Malzemeler
Özet
Vanadium carbide is important for industrial applications because of its high hardness, high temperature resistance, high chemical, and thermal stability. It is generally obtained from the reaction between V and C powders at a high temperature ranging from 1100 to 1500°C. Investigations on these high strength, high abrasion resistant, hard materials have been intensified in recent years and consequently, significant improvements have been achieved. In this study, VC alloys are produced with low cost processes, by reducing the oxides of their components by SHS methods and ball mill-assisted carbothermal reduction. In the experimental stage, V2O5 was used as oxidized Vanadium source, Cblack as carbon source, magnesium and Cblack as reductant. In the study, VC powders were synthesized by two different methods and optimum production conditions were determined. Furthermore, the effect of different stoichiometric charge components and the effect of experiment durations were realized by X-ray diffraction, HSC Chemistry, and SEM analyses for different reductants.
Anahtar Kelimeler
Carbothermal Reduction | Leaching | SHS | Vanadium Carbide