Investigation of COD and color removal from medium density fiberboard wastewater by photo-electro-Fenton method
Yazarlar (2)
Nevzat Beyazıt Ondokuz Mayıs Üniversitesi, Türkiye
Dr. Öğr. Üyesi Kasım ATMACA Sinop Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Desalination and Water Treatment (Q3) | ||
| Dergi ISSN | 1944-3994 Dergi Bilgileri (2021) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 04-2021 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-04-2021 |
| Cilt / Sayı / Sayfa | 218 / 1 / 381–388 | DOI | 10.5004/dwt.2021.26993 |
| Makale Linki | 10.5004/dwt.2021.26993 | ||
| UAK Araştırma Alanları |
Çevre Bilimleri ve Mühendisliği
|
||
| Özet |
| In this study, the effects of current density (10–50 A/m2), pH (2.5–5.0), H2O2 concentration (100– 1,500 mg/L), and the distance between electrodes (1.0–1.5 cm) on chemical oxygen demand (COD) and color removal from medium-density fiberboard (MDF) wastewater by the photo-electro- Fenton method were investigated. Under achieved optimum experimental conditions (pH: 3, current density: 10 A/m2, H2O2 concentration: 750 mg/L, UV source: 16 W, the distance between electrodes: 1.0 cm, stirring rate: 250 rpm) a maximum COD removal of 98.17% (at 90 min) and maximum color removal of 95.28% (at 45 min) were obtained with 11.11 and 5.56 kWh/m3 electrical energy consumptions, respectively. Under these conditions, H2O2/Fe+2 molar ratios were calculated as 6.47 and 12.94 for the maximum COD and color removals, respectively. Also, while the total treatment cost for the maximum COD removal … |
| Anahtar Kelimeler |
| Chemical oxygen demand | Color | Electricity consumption | Medium-density fiberboard | Photo-electro-Fenton |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 5 |
| Scopus | 6 |
| Google Scholar | 6 |